Obstruction light used in Tower Crane, Wind Turbine, High Mast, Metallurgies, Towers(Telecom, GSM, Electric), Smokestacks, High-rise Buildings and any other potentially hazardous obstructions within 45 meters to air traffic with a steady burning red safety light.

Main Parameter
1.Mode: CS-810/D
2.Standard: ICAO (Aerodromes Annex 14) Low-intensity Type B and FAA L-810
3.Light intensity:≥32cd
4.Flash rate: Steady-burning mode or Flashing mode (20-60times/minute)
5.Working way of two lights:
-Two light flashing by Main(duty)-standby way, Two lights flashing at the same time
-Two light working by Main(duty)-standby way, Two lights working at the same time.(Steady-burning mode, two ways)
6.Light source: LED
7.Service life of LED: ≥100,000hours
8.Operating voltage: AC220V (option voltage,eg.AC120V, AC110V, DC48V)
9.Power consumption:1W
10.Overall size(mm): 295 by 130 by 337
11.Installation size: 78 by 78 by 9
12. Vertical degree: ≥10°
13. Horizontal degree: 360°
14. Material:
-Housing: PC
-Base: die casting aluminum
15.Weight: 2Kg
16.Emitting color: Aviation red
17.Ambient temperature: -40℃~+70℃
18.Wind load: 80m/s
19. Protection standard: IP65

1.ICAO Certificate from USA Intertek. No.:102968386CRT-001TVoC
2.PC material with good impact protection strength, thermal stability, high transmittance.
3.International-advanced cold LED with low power consumption, high brightness and service life of light source reaching 100000hours.
4.LED based on obstruction light last 15 times longer than traditional light source, incandescent light.
5.About 96% less power than 116W incandescent light.
6.Major maintenance cost saving, Surge protection device inside light.
7.Strong corrosion resistance, Shock and Vibrations protection and UV protection.
8.Dawn to Dusk operating:Built-in photocell can let light work automatically at night, closed during the day.
9.Free maintenance and small size being suitable for flag-pole or tower installation way.
10.There is one switch converting between Flashing mode and Steady-burning mode.